dmesg - x11 is 0425
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-19-generic (buildd@orlo) (gcc version 4.8.2 (Ubuntu 4.8.2-17ubuntu1) ) #40-Ubuntu SMP Mon Mar 24 02:37:00 UTC 2014 (Ubuntu 3.13.0-19.40-generic 3.13.6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000008d7ff] usable
BIOS-e820: [mem 0x000000000008d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
BIOS-e820: [mem 0x000000001f000000-0x00000000200fffff] reserved
BIOS-e820: [mem 0x0000000020100000-0x0000000079757fff] usable
BIOS-e820: [mem 0x0000000079758000-0x0000000079787fff] reserved
BIOS-e820: [mem 0x0000000079788000-0x0000000079797fff] ACPI data
BIOS-e820: [mem 0x0000000079798000-0x00000000798dcfff] ACPI NVS
BIOS-e820: [mem 0x00000000798dd000-0x0000000079bc8fff] reserved
BIOS-e820: [mem 0x0000000079bc9000-0x0000000079bc9fff] usable
BIOS-e820: [mem 0x0000000079bca000-0x0000000079c0bfff] reserved
BIOS-e820: [mem 0x0000000079c0c000-0x0000000079d89fff] usable
BIOS-e820: [mem 0x0000000079d8a000-0x0000000079ff6fff] reserved
BIOS-e820: [mem 0x0000000079ff7000-0x0000000079ffffff] usable
BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 04/21/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x7a000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-through
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07A000000 mask FFE000000 uncachable
2 base 07C000000 mask FFC000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1952MB, range: 32MB, type UC
reg 2, base: 1984MB, range: 64MB, type UC
total RAM covered: 1952M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 3 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 1952MB, range: 32MB, type UC
reg 2, base: 1984MB, range: 64MB, type UC
found SMP MP-table at [mem 0x000fd6a0-0x000fd6af] mapped at [c00fd6a0]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0089000] 89000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x1effffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x1effffff] page 2M
init_memory_mapping: [mem 0x20100000-0x33ffffff]
[mem 0x20100000-0x201fffff] page 4k
[mem 0x20200000-0x33ffffff] page 2M
BRK [0x01b85000, 0x01b85fff] PGTABLE
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b86000, 0x01b86fff] PGTABLE
RAMDISK: [mem 0x35ce8000-0x36e6bfff]
ACPI: RSDP 000f04a0 000024 (v02 ALASKA)
ACPI: XSDT 7978b078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 79796770 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 7978b180 00B5EA (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 798dcf80 000040
ACPI: APIC 79796880 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 79796908 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 79796950 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: LPIT 79796990 000104 (v01 ALASKA A M I 00000003 VLV2 0100000D)
ACPI: HPET 79796a98 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 79796ad0 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: SSDT 79797238 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 797974c8 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
ACPI: UEFI 79797648 000042 (v01 ALASKA A M I 00000000 00000000)
ACPI: Local APIC address 0xfee00000
1060MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b87000, 0x01b87fff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x79ffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008cfff]
node 0: [mem 0x00100000-0x1effffff]
node 0: [mem 0x20100000-0x79757fff]
node 0: [mem 0x79bc9000-0x79bc9fff]
node 0: [mem 0x79c0c000-0x79d89fff]
node 0: [mem 0x79ff7000-0x79ffffff]
On node 0 totalpages: 493420
free_area_init_node: node 0, pgdat c198ca40, node_mem_map f4da8020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3980 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 219902 pages, LIFO batch:31
HighMem zone: 2121 pages used for memmap
HighMem zone: 269538 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] low level lint[0xaf])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x02] low level lint[0xaf])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x03] low level lint[0xaf])
ACPI: NMI not connected to LINT 1!
ACPI: LAPIC_NMI (acpi_id[0x04] low level lint[0xaf])
ACPI: NMI not connected to LINT 1!
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-86
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 103
PM: Registered nosave memory: [mem 0x0008d000-0x0008dfff]
PM: Registered nosave memory: [mem 0x0008e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x1f000000-0x200fffff]
e820: [mem 0x7f000000-0xe00f7fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f7bba000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 491636
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 3997688 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0007a000)
Memory: 1923276K/1973680K available (6495K kernel code, 641K rwdata, 2748K rodata, 876K init, 924K bss, 50404K reserved, 1078152K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19aa000 - 0xc1a85000 ( 876 kB)
.data : 0xc1657fb2 - 0xc19a9480 (3397 kB)
.text : 0xc1000000 - 0xc1657fb2 (6495 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
NR_IRQS:2304 nr_irqs:1024 16
CPU 0 irqstacks, hard=f700c000 soft=f700e000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1866.505 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.01 BogoMIPS (lpj=7466020)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (c1a85000 - c1a8d000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27674 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Celeron(R) CPU N2920 @ 1.86GHz (fam: 06, model: 37, stepping: 03)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000ffffffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
CPU 1 irqstacks, hard=f711a000 soft=f711c000
x86: Booting SMP configuration:
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
CPU 2 irqstacks, hard=f719c000 soft=f719e000
Initializing CPU#2
#2
CPU 3 irqstacks, hard=f71e8000 soft=f71ea000
Initializing CPU#3
#3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (14932.04 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x79798000-0x798dcfff] (1331200 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 8:34:14, date: 04/25/14
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 79780918 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 79780498 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 79781e18 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 79782f18 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: Power Resource [USBC] (on)
ACPI: Power Resource [FN00] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xd0815fff]
pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:02.0: reg 0x20: [io 0xf080-0xf087]
pci 0000:00:13.0: [8086:0f23] type 00 class 0x010601
pci 0000:00:13.0: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:13.0: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:13.0: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:13.0: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:13.0: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:13.0: reg 0x24: [mem 0xd0815000-0xd08157ff]
pci 0000:00:13.0: PME# supported from D3hot
pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xd0800000-0xd080ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
pci 0000:00:1a.0: reg 0x10: [mem 0xd0500000-0xd05fffff]
pci 0000:00:1a.0: reg 0x14: [mem 0xd0400000-0xd04fffff]
pci 0000:00:1a.0: PME# supported from D0 D3hot
pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xd0810000-0xd0813fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xd0814000-0xd081401f]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [8086:0082] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xd0700000-0xd0701fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd07fffff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 0x18: [mem 0xd0604000-0xd0604fff 64bit]
pci 0000:02:00.0: reg 0x20: [mem 0xd0600000-0xd0603fff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0008d800-0x0008ffff]
e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
e820: reserve RAM buffer [mem 0x79758000-0x7bffffff]
e820: reserve RAM buffer [mem 0x79bca000-0x7bffffff]
e820: reserve RAM buffer [mem 0x79d8a000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
system 00:03: [io 0x0680-0x069f] has been reserved
system 00:03: [io 0x0400-0x047f] has been reserved
system 00:03: [io 0x0500-0x05fe] has been reserved
system 00:03: [io 0x0600-0x061f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0a00-0x0a0f] has been reserved
system 00:04: [io 0x0a10-0x0a2f] has been reserved
system 00:04: [io 0x0a30-0x0a4f] has been reserved
system 00:04: [io 0x0a50-0x0a6f] has been reserved
system 00:04: [io 0x0a70-0x0a7f] has been reserved
system 00:04: [io 0x0a80-0x0a8f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:06: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:06: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:06: [mem 0xfed04000-0xfed04fff] has been reserved
system 00:06: [mem 0xfed0c000-0xfed0ffff] has been reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfef00000-0xfeffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs INT33bd (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd07fffff]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xd0600000-0xd06fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xd0815fff]
pci_bus 0000:01: resource 1 [mem 0xd0700000-0xd07fffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xd0600000-0xd06fffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17936K (f5ce8000 - f6e6c000)
microcode: CPU0 sig=0x30673, pf=0x8, revision=0x321
microcode: CPU1 sig=0x30673, pf=0x8, revision=0x321
microcode: CPU2 sig=0x30673, pf=0x8, revision=0x321
microcode: CPU3 sig=0x30673, pf=0x8, revision=0x321
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1398414854.884:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1685
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
efifb: cannot reserve video memory at 0xa0000
efifb: framebuffer at 0xa0000, mapped to 0xc00a0000, using 64k, total 64k
efifb: mode is 640x480x1, linelength=80, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 80x30
fb0: EFI VGA frame buffer device
intel_idle: does not run on family 6 model 55
ipmi message handler version 39.2
ACPI: AC Adapter [ADP1] (on-line)
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (27 C)
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
isapnp: Scanning for PnP cards...
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 103 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-19-generic xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-19-generic xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usb 1-2: new low-speed USB device number 2 using xhci_hcd
isapnp: No Plug & Play device found
usb 1-2: New USB device found, idVendor=046d, idProduct=c31d
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: USB Keyboard
usb 1-2: Manufacturer: Logitech
usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-2: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-4: new low-speed USB device number 3 using xhci_hcd
usb 1-4: New USB device found, idVendor=045e, idProduct=0797
usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-4: Product: USB Optical Mouse
usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 1-6: new high-speed USB device number 4 using xhci_hcd
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
usb 1-6: New USB device found, idVendor=0424, idProduct=4604
usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
NET: Registered protocol family 17
Key type dns_resolver registered
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 5 ports detected
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 963696557b49252d0adde414a1893096c7b17564'
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
Magic number: 10:741:574
rtc_cmos 00:00: setting system clock to 2014-04-25 08:34:16 UTC (1398414856)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 876K (c19aa000 - c1a85000)
Write protecting the kernel text: 6496k
Write protecting the kernel read-only data: 2756k
NX-protecting the kernel data: 5792k
systemd-udevd[108]: starting version 204
ahci 0000:00:13.0: version 3.0
ahci 0000:00:13.0: irq 104 for MSI/MSI-X
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 105 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xf8474000, 04:8c:00:00:00:07, XID 0c900800 IRQ 105
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
hidraw: raw HID events driver (C) Jiri Kosina
ahci 0000:00:13.0: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x2 impl SATA mode
ahci 0000:00:13.0: flags: 64bit ncq pm led clo pio slum part deso sadm sds
scsi0 : ahci
scsi1 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xd0815000 port 0xd0815180 irq 104
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input4
hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-2/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/input/input5
hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-2/input1
input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input6
hid-generic 0003:045E:0797.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-4/input0
usb 1-6.2: new full-speed USB device number 5 using xhci_hcd
usb 1-6.2: New USB device found, idVendor=0eef, idProduct=0001
usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6.2: Product: USB TouchController
usb 1-6.2: Manufacturer: eGalax Inc.
usb 1-6.2: ep 0x81 - rounding interval to 16 microframes, ep desc says 24 microframes
tsc: Refined TSC clocksource calibration: 1866.666 MHz
usb 1-6.3: new full-speed USB device number 6 using xhci_hcd
usb 1-6.3: New USB device found, idVendor=eb03, idProduct=0920
usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-6.3: Product: ARMVE v1.0
usb 1-6.3: Manufacturer: MSA S.A.
usb 1-6.3: ep 0x83 - rounding interval to 1024 microframes, ep desc says 2040 microframes
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-6.5: new high-speed USB device number 7 using xhci_hcd
ata2.00: ATA-8: TOSHIBA MK3276GSX, GS001A, max UDMA/100
ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3276GS GS00 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 1-6.5: New USB device found, idVendor=0424, idProduct=2530
usb 1-6.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-6.5: Product: Bridge device
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
Switched to clocksource tsc
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 14 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
random: init urandom read with 104 bits of entropy available
random: nonblocking pool is initialized
Adding 1973244k swap on /dev/sda5. Priority:-1 extents:1 across:1973244k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[275]: starting version 204
lp: driver loaded but no devices found
[drm] Initialized drm 1.1.0 20060810
type=1400 audit(1398414867.470:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=325 comm="apparmor_parser"
type=1400 audit(1398414867.470:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=325 comm="apparmor_parser"
type=1400 audit(1398414867.470:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=325 comm="apparmor_parser"
type=1400 audit(1398414867.474:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=325 comm="apparmor_parser"
type=1400 audit(1398414867.474:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=325 comm="apparmor_parser"
type=1400 audit(1398414867.474:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=325 comm="apparmor_parser"
[drm] Memory usable by graphics device = 2048M
checking generic (a0000 10000) vs hw (c0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: irq 106 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
cfg80211: Calling CRDA to update world regulatory domain
Console: switching to colour frame buffer device 240x67
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:01:00.0: irq 107 for MSI/MSI-X
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:0a: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 108 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x40478b2d
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000007
SKU: customization=0x0000008b
SKU: external_amp=0x5
SKU: platform_type=0x1
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x19
realtek: No valid SSID, checking pincfg 0x40478b2d for NID 0x1d
realtek: Enabling init ASM_ID=0x8b2d CODEC_ID=10ec0662
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
cdc_acm 1-6.3:1.0: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-6.3:1.0: ttyACM0: USB ACM device
input: eGalax Inc. USB TouchController Pen as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input10
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
input: eGalax Inc. USB TouchController as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.2/1-6.2:1.0/input/input11
hid-multitouch 0003:0EEF:0001.0004: input,hiddev0,hidraw3: USB HID v1.00 Pointer [eGalax Inc. USB TouchController] on usb-0000:00:14.0-6.2/input0
iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
init: failsafe main process (598) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1398414870.382:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=717 comm="apparmor_parser"
type=1400 audit(1398414870.382:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=717 comm="apparmor_parser"
type=1400 audit(1398414870.382:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=717 comm="apparmor_parser"
init: cups main process (718) killed by HUP signal
init: cups main process ended, respawning
type=1400 audit(1398414870.598:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=769 comm="apparmor_parser"
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
wlan0: authenticate with 0c:72:2c:fd:41:2d
wlan0: send auth to 0c:72:2c:fd:41:2d (try 1/3)
wlan0: authenticated
wlan0: waiting for beacon from 0c:72:2c:fd:41:2d
wlan0: associate with 0c:72:2c:fd:41:2d (try 1/3)
wlan0: RX AssocResp from 0c:72:2c:fd:41:2d (capab=0x431 status=0 aid=12)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
audit_printk_skb: 150 callbacks suppressed
type=1400 audit(1398414900.568:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1930 comm="apparmor_parser"
type=1400 audit(1398414900.568:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1930 comm="apparmor_parser"
type=1400 audit(1398414900.568:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1930 comm="apparmor_parser"
systemd-hostnamed[2045]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[2149]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-3: new high-speed USB device number 8 using xhci_hcd
usb 1-3: New USB device found, idVendor=125f, idProduct=312b
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: ADATA USB Flash Drive
usb 1-3: Manufacturer: ADATA
usb 1-3: SerialNumber: 000000000000000101
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi2 : usb-storage 1-3:1.0
usbcore: registered new interface driver usb-storage
scsi 2:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 30869504 512-byte logical blocks: (15.8 GB/14.7 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
systemd-hostnamed[2282]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[3926]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[5944]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 1-3: USB disconnect, device number 8
FAT-fs (sdb1): unable to read boot sector to mark fs as dirty
------------[ cut here ]------------
WARNING: CPU: 2 PID: 6004 at /build/buildd/linux-3.13.0/fs/sysfs/group.c:214 sysfs_remove_group+0xb9/0xc0()
sysfs group c19682e8 not found for kobject 'target2:0:0'
Modules linked in: nls_iso8859_1 usb_storage ctr ccm rfcomm bnep bluetooth arc4 iwldvm mac80211 hid_multitouch joydev cdc_acm snd_hda_codec_hdmi snd_hda_codec_realtek iwlwifi snd_hda_intel snd_hda_codec snd_hwdep cfg80211 snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi intel_rapl snd_seq coretemp kvm_intel kvm snd_seq_device crc32_pclmul snd_timer i915 serio_raw snd drm_kms_helper drm video mac_hid soundcore i2c_algo_bit lp parport hid_generic usbhid hid r8169 ahci mii libahci
CPU: 2 PID: 6004 Comm: umount Not tainted 3.13.0-19-generic #40-Ubuntu
Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 04/21/2014
00000000 00000000 e36add48 c1648735 e36add88 e36add78 c1055cce c1846a5c
e36adda4 00001774 c18469f4 000000d6 c11daf49 c11daf49 00000000 c19682e8
f6a6ce1c e36add90 c1055d23 00000009 e36add88 c1846a5c e36adda4 e36addb8
Call Trace:
[] dump_stack+0x41/0x52
[] warn_slowpath_common+0x7e/0xa0
[] ? sysfs_remove_group+0xb9/0xc0
[] ? sysfs_remove_group+0xb9/0xc0
[] warn_slowpath_fmt+0x33/0x40
[] sysfs_remove_group+0xb9/0xc0
[] dpm_sysfs_remove+0x37/0x40
[] device_del+0x34/0x170
[] scsi_target_reap_usercontext+0x24/0x30
[] execute_in_process_context+0x4c/0x60
[] scsi_target_reap+0x98/0xb0
[] scsi_device_dev_release_usercontext+0x123/0x150
[] execute_in_process_context+0x4c/0x60
[] scsi_device_dev_release+0x18/0x20
[] device_release+0x2b/0x90
[] ? kfree+0xcd/0x100
[] kobject_cleanup+0x6f/0x1a0
[] ? kobject_cleanup+0x87/0x1a0
[] ? device_release+0x32/0x90
[] kobject_put+0x25/0x60
[] ? scsi_device_put+0x3f/0x50
[] put_device+0x14/0x20
[] scsi_device_put+0x4a/0x50
[] scsi_disk_put+0x28/0x40
[] sd_release+0x40/0xc0
[] ? destroy_inode+0x31/0x50
[] __blkdev_put+0x128/0x160
[] __blkdev_put+0xd9/0x160
[] blkdev_put+0x43/0x110
[] kill_block_super+0x3d/0x70
[] deactivate_locked_super+0x33/0x50
[] deactivate_super+0x3a/0x60
[] mntput_no_expire+0xae/0x140
[] SyS_umount+0x7d/0xc0
[] sysenter_do_call+0x12/0x28
---[ end trace 4be9b298fe31b953 ]---
usb 1-3: new high-speed USB device number 9 using xhci_hcd
usb 1-3: New USB device found, idVendor=125f, idProduct=312b
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: ADATA USB Flash Drive
usb 1-3: Manufacturer: ADATA
usb 1-3: SerialNumber: 000000000000000101
usb-storage 1-3:1.0: USB Mass Storage device detected
scsi3 : usb-storage 1-3:1.0
usb 1-3: USB disconnect, device number 9
perf samples too long (2526 > 2500), lowering kernel.perf_event_max_sample_rate to 50000